Foliant 520T – Single Sided Laminator

Foliant 520T - Single Sided Laminator

Foliant 520T

Foliant 520T Entry-Level Laminator is perfect for print centers with short runs or lower volumes, these entry-level laminating machines offer the ability to bring one-sided laminating projects in house saving both time and money. The synchronized conveyors on the manual feed table make loading sheets easy. Systems are available with either pressure coil springs or pneumatic pressure controls.

The Foliant 520T is a simple manual laminating machine, designed with an operating width of 20.4″ (520 mm). It represents an ideal choice for a professional in-house single side lamination in small offset and Digital printing shops running at speeds up to 23’/minute (7 meters/min).

With a very small footprint of 36″ x 47″ (90 x 117 cm), the Foliant 520T laminator offers a maximum sheet size of 20.4″ x 29.1″ (52 x 74 cm) and a minimum sheet size of 8-1/2″ x 11″ (30 x 25 cm / A4). The roll of a film is mounted on an easy handle shaft with a film tension control breaker. The shaft capacity is up to 10,000′ (3000 m) of the 1.2 mil (31 microns) film. The film holder unit is equipped with a trim slitter and a perforating wheel.

The laminating process is done between two laminating rollers – an upper heated silicone roller, and a lower hard rubber pressure roller. The laminating roller is heated with an infra-red heating spiral, with a sensitive contact temperature sensor. The pressure is mechanically adjustable to achieve the pressure between the laminating rollers and the unit is equipped with an adjustable decurl unit.

The Foliant 520T is a manual machine, for an easy paper loading the laminating unit is equipped with a synchronized feeding conveyor and an adjustable side guider. Separation of laminated sheets are handled manually. Due to the perforation of film which is done in the process of laminating, the whole process is easy. An optional separator unit can be added at a later date.

For additional product information, please contact Mid-State Litho, Inc at 1-800-343-4231 or you can reach our sales department at sales@midstatelitho.net.

Visit our website at www.midstatelitho.net to order equipment and supplies.

Leave a Reply

Your email address will not be published.